*** Rendition V1000 Reference Drivers ***

Version: 2.1 beta2  -  November 14th, 1997

These drivers are beta reference drivers.  They are not supported by
Rendition, Inc.
or by board manufacturers.  They are provided to users of Rendition
based
products on an "as is" basis, without warranty. They may not be
disassembled or reverse-engineered.

These drivers may not work on your system, or you may lose
enhanced functionality provided by your board manufacturer's drivers.
Make sure you retain a copy of your existing drivers before installing
these drivers.

Check with your board manufacturer to get updated, supported drivers.
The fixes present in these reference drivers should make their way into
your board
manufacturers' next release, dated later than November 14th 1997.

Please check with your board manufacturer, or on Rendition's WWW
site at www.rendition.com to locate more recent driver releases.

****Installation Instructions for v1000 Reference Drivers***

Open Control Panel
Open Display
Select the Settings tab
Click the Advanced Properties button
Click the Change button
Click Have Disk button
Click the Browse button
Change to the directory where the drivers are located (ie on the CD)
Once you have found the proper directory, there should be a "V1000.INF"
visible in the left window pane.  
Click OK
Click OK again
Click OK again (Rendition Verite 1000 PCI should be visible in the window)
At this point, the drivers are being installed.  Once they have been
installed, you will need to restart Windows (you should be automatically
prompted you to do this).


Trouble shooting

If for some reason you have any problems after installing these drivers,
try the following first.

On your CD, there is a program called "PHX2105.COM" (this should be located
in the same general vacinity as where you found the drivers.  Copy this
file to your root directory on your C: drive.  Then, edit your "Autoexec.bat"
and add the following line:

C:\PHX2105.COM

This will load the TSR version of our latest BIOS.  If you wish to disable
having this load every time you start your PC, then "REM" out the above line
in your "Autoexec.bat" file (just add REM infront of the line and save).